So I’m relaxing in your kitchen in the center of your day on the point of watch a football game, I've the oven choosing the small hotdogs, on the point of get ready if this happened...I’m sweating!
That’s after i made the decision to set up a ceiling fan. A ceiling fan offers many functional benefits while adding a particular decorative touch to some room. Within the summer time it can benefit awesome an area (or perhaps a porch). During the cold months you can use it at low speeds to flow warmer air which has risen to ceiling level.
Whatever the reason for setting up a ceiling fan, you'll find that it is a relatively simple project especially if you are changing an easy fixture in the center of an area (all of the wiring will be there). Probably your greatest obstacle is a new workbox that's approved for that weight of the overhead fan or adding support for an existing workbox, a workbox that's not approved for ceiling fan weight can result in disaster!
The next instructions cover general installations when changing a current light. You'll have a concept of what's needed for that project. Make certain you review and follow instructions which are specific towards the fan you buy. Based on your installation needs, you may want to buy a longer “down rod” for cathedral roofs or purchase an optional lighting package if it's not incorporated.
1)Switch off the circuit by switching from the breaker. Take away the existing ceiling fixture.
2)Determine whether your overall workbox will give you enough support. If you can get the workbox out of your loft, determine when the workbox has metal mix braces that span between two joists. Otherwise, you are able to cut a 2”x4” to suit among the joists. Do the installation therefore it touches the top workbox. Anchor the wood in position. In the room, use 1” drywall screws to anchor this area towards the wood brace.
3)If you don't connect in the loft, you are able to use a metal mix brace with the rough opening inside your ceiling after which attach an approved workbox towards the metal brace.
4)I personally don't like this part! Assemble the ceiling fan based on the producers provided instructions. When you're prepared to hang the fan, go ahead and take mounting bracket and do the installation towards the ceiling workbox. Some fans include a hanging frame that enables you to definitely hook the ball finish from the lower fishing rod in position. Others include a bracket that delivers a “J” hook that enables you to definitely hang the motor housing while connecting in the wiring
5)Should you removed an easy fixture in the ceiling, possibly the existing wiring will give you one switched circuit for your new ceiling fan. What this means is the wall switch will function as master change to turn the system on / off. The pull chain around the fan will even control the fan (and it is speed). Should you install an optional light package around the fan, both wall switch along with a pull chain will even manage it.
6)Following a wiring diagram supplied with the fan, connect the wires using wire nuts. Probably this is actually hooking up the two black wires hooking up the two whitened wires and hooking up the two ground wires.
7)When the fan is wired, finish its set up based on the specific manufacturer’s instructions. You will have to install the canopy to the top fishing rod.
8)You must also attach the fan rotor blades. If you're setting up an easy package, take away the cover at the base from the fan in which the light package is going to be mounted. Following a manufacturer’s instructions, assemble and install the sunshine package.
You now will be ready to switch the breaker on and begin taking pleasure in your brand-new ceiling fan.
0 comments:
Post a Comment